|
 | TECOFLOOR It is a colored hardening in powder, for industrial flooring, composed by siliceous sand, cements, resins, pigments resistant to infrared and ultraviolet rays, dispersing, additives . Is a premix powder ready to use product, stored in bags weighing 25 kg, that confers to a surface made of concrete a good resistance to friction . Available on request in 25 different colors.
|  |
SEALFLOOR 100 Is a sealer for concrete floorings, specific formulated to give e excellent resistance to agents atmospheric, to water, to frost, to industrial fumes of medium aggressiveness ( acid and basic), to oils , to muffs , to salts, to the diluted acids , to the alkaline solutions, to infrared and ultraviolet rays ecc. The Sealfloor 100 is a monocomponent sealer clear to basic of acrylic polymers and is appropriate for cement floorings and coverings, industrial floorings, stamped flooring, Stone Spray flooring, Stone Overlay floorings and acid stain floorings. Data sheet in .pdf format 
|  |
SEALFLOOR COLOR Protective paint with acrylic polymers. Product highly resistant to adverse atmospheric conditions ,to basic and acid industrial fumes, to oils, to the muffs, to infrared and ultraviolet rays etc. Is remarkably resistant to benzenes, solvents and diluting agents. Sealfloor Color is particularly employed on the industrial floors . The product can be supplied also with anti slip characteristics. Available in all RAL colors.
|  | POLISTONE
|  | C2 HARD C2 Hard is an advanced, lithium based sealer, hardener and densifier for concrete. This is a much more effective alternative to conventional sodium or potassium silicate surface hardeners. This lithium silicate/colloidal silica treatment deeply penetrates and reacts with concrete to produce insoluble calcium silicate hydrate within the concrete pores.
|  | C2 SUPER HARD C2 Super Hard, with the maximum lithium content is the premium sealer, hardener and densifier for concrete. This lithium silicate treatment deeply penetrates and reacts with the concrete to produce insoluble calcium silicate hydrate within the concrete pores. Treated surfaces resist damage by water, chemical attack, erosion or surface abrasion.
|  | C2 SEAL C2 Seal provides high-gloss beauty with the penetrating toughness of C2 Hard™ – the advanced sealer, hardener and densifier for horizontal concrete. The easy-application lithium silicate treatment penetrates and reacts with the concrete. The concrete, new or old, dramatically increases in hardness, denseness and durability. Meanwhile, C2 Seal’s™ polymeric component seals the concrete with a rich, glossy finish that makes concrete easy to clean and maintain. Treated surfaces resist damage from water, chemical attack and abrasion.
|  |
THINNER STONE Is a misture of solvents particularly suitable to dilute the sealers Sealfloor 100 and Sealfloor Color.
|  |
POLYPROPYLENE FIBERS Poliprophylens filaments at elevated molecular weight; the fibers to appear a regular and uniform aspect , without ramifications and fibrillations. The nominal diameter is around 18 micron, the weight is of 2,2 gr for 10 km of single filament ( around 150.000.000 of fibers by 18mm in one bag by 600gr). The Fibercem is very strong to acids and to alkali, is perfectly stable to ultraviolet rays, to bacteria and muffs; have a good adhesion to cement thanks to chemical bonds that develop. Data sheet in .pdf format
|  |
STONE POLYMER Is a acrylic polymer aqueous solution to be of use as primer of anchorage on surfaces in cement for the covering Decowall and us to create a perfect adhesiveness between a new and old concrete flooring. Is used in Stone Spray system and Stone Overlay system in the mix with proper quantity to contribute at superior adhesion on support. Data sheet in .pdf format
|  | NEOPRENE JOINT FILLER
|
|
